Is It Better To Choose Tiles Or Wood Floors On Floor Heating?

2022/6/30 18:58:28

Floor heating is the most popular heating method at present, because floor heating can be paved with both ceramic tiles and wooden floors, so everyone is confused about whether it is better to lay tiles or wood floors on the floor heating. Comparing the heating temperature and comfort of wooden floors and tiles, which is more suitable for floor heating? How much is the temperature difference between wood floor and tile floor heating? In this guide, we compare tile vs wood floors for floor heating.

Tile Vs Wood Floors For Floor Heating - Is It Better To Choose Tiles Or Wood Floors On Floor Heating?

1. Price

The floor is relatively cheaper, because the floor tiles need handling fees, and the wooden floor is generally responsible for distribution and installation if you choose a regular business. However, laying the floor will increase the cost of decoration and use, because there is also a keel under the floor, and the hot gas has to be transmitted to the floor through the keel, and then through the thick floor, which consumes more energy.

2. Cleaning & maintenance

Most people think the wooden floor is difficult to maintain. They are afraid of water and are easy to arch. The ceramic tiles are very clean and easy to maintain in the later stage. In fact, the wooden floor can absorb moisture, and it is warm in winter and cool in summer. Laying the wooden floor can also reduce the noise, and it is less dirty. It will be very obvious if the tiles are stained with dust.

3. Thermal conductivity

In terms of heat dissipation speed, tiles have better thermal conductivity and higher thermal efficiency than wood floors. Therefore, the indoor temperature of tile floors rises more rapidly, and the temperature can be felt immediately without preheating.

4. Thermostability

In terms of constant temperature, the constant temperature of the floor will be better than that of the ceramic tiles. This means that the temperature rises or falls, and its sensitivity is not as high as that of the ceramic tiles. For example, the temperature rise will not be so fast, and the temperature drop will not be so fast. The tiles heat up quickly and cool down quickly, and it is impossible to maintain the temperature. The wooden floor can still have residual temperature after turning off the floor heating, but the ceramic tiles will cool down faster, and the home may become cool quickly.

5. Comfort

The tile is hard and gives people a cold visual effect, while the wooden floor gives people a warm feeling. Moreover, the wood floor material is soft and has good skid resistance. It is especially suitable for families with children and the elderly. It is best to lay the wood floor to protect them. Although the thermal conductivity is worse than that of tiles, it has good thermostatic performance and comfortable foot feel. Even if barefoot is on it, it won't burn. It feels very warm. People who like to walk barefoot at home are also the first choice for wooden floors, which will not be too cold.

6. Environmental protection

If it is from the perspective of environmental protection, tiles will be better. The potential radiation of current ceramic tiles is basically small. Of course, the premise is regular brand tiles - Foshan Hanseceramictile. And the floor, especially the solid wood composite floor or laminate floor, is easy to emit formaldehyde under high temperature, especially some low-quality floors. Therefore, from the perspective of environmental protection, tiles are better.

7. Stability

Tile is more stable than wooden floor. Because the ceramic tile has low moisture content and does not deform at high temperature, it has good stability. The wood floor has a certain probability of deformation, which will produce corresponding changes after heating. If the change is too large, it may lead to the deformation and warping of the floor, so the solid wood floor is not suitable for geothermal floor. If the floor heating chooses to pave the wooden floor, it is best to choose the multi-layer solid wood composite floor. Because in the same environment, multi-layer solid wood composite floor is the most stable and not easy to deform.

How Much Is The Temperature Difference Between Wood Floor & Tile Floor Heating?

The effect of heating with wooden floors and ceramic tiles is different, and the temperature will vary by almost three to five degrees. The wood floor and ceramic tile have corresponding advantages. The heat dissipation effect of the wood floor will be slightly worse, but the heat preservation effect of the wood floor is better. After turning off the floor heating, the temperature can be kept high for a short time, while the temperature of the ceramic tile will be reduced in a short time after turning off the floor heating. The comfort of the wooden floor is also relatively high, while the tiles are cooler in winter and cooler in summer. You can also choose appropriate floor decoration materials according to the house type. In addition, it will be safer to pave wooden floors at home.

Which Is More Suitable For Floor Heating, Tiles Or Wood Floors?

In general, you can choose to lay wood floor or tile on the floor heating. Both of them are suitable for laying on the floor heating. However, the heating temperature of the wood floor heating and the ceramic tile heating is different. Generally speaking, the temperature of the floor tile will be higher, about 3-5 degrees higher than that of the wood floor heating, so you can choose according to your preferences or the actual situation of your home.

How To Install Wood Floor For Floor Heating?

1. If the water in the cement floor is not completely drained before the floor is installed, a certain moisture shock wave will be generated, which will lead to the cracking of the geothermal floor and the warping of the installed floor. Therefore, the moisture in the cement floor will be completely drained.

2. The laying direction shall be investigated before floor installation. The laying of the whole room shall start from one side of the room and gradually approach the other side. There shall be room between the first floor laid and the wall, and the second floor next to it shall use plates. The ends of the two adjacent parallel floors shall be bifurcated, which shall be used as the benchmark for the joint between the floor and the wall. In addition, when connecting with the stairs, room doors and other fixed facilities, the same gap shall be reserved, generally between 0.8 cm and 1.0 cm in length.

3. When laying the floor, the first few rows of floors are generally used as the laying standard. Therefore, in order to ensure the overall laying, the laying of the first few rows of floors must be done well, and the assembled model must be made in advance. If you use a hand saw to cut the floor, you need the floor pattern to face the top. However, if the electric saw is used to cut the floor, the pattern surface of the floor faces downward. In either case, the ends of the floor must be cut neatly.