A bathroom is a place with heavy moisture in the home space. Therefore, more efforts should be made in the selection of bathroom tiles. In addition to high appearance value, durability, dirt resistance, and slip resistance are also very important selection criteria.

6 Methods to Pick the Best Bathroom Tiles - Tips on Choosing the Right Bathroom Tile

1. The most important slip resistance

Even if the bathroom design scheme of dry and wet zones is made, it is inevitable that the whole body is full of moisture or accidentally steps on the wet floor after just taking a bath. Therefore, do not take chances. Just use it for the bathroom floor. Ceramic tiles with a high slip resistance should be selected in both wet and dry areas. From the perspective of tile surface solutions and characteristics, quartz sandstone tiles are the most common tiles in the bathroom, followed by retro tiles and quartz tiles. However, this is only a rough classification. Nowadays, many quartz tile surfaces also have anti-skid solutions for the ground, so it is necessary to ask the manufacturer before selecting.

2. Select ceramic tiles with good stain resistance

Washing the bathroom is a hard job, especially when people see the dirt and mildew stains on the tiles. In fact, the problem of how to maintain dental roots in the bathroom depends on the selection of ceramic tiles. Whether it is bathroom floor tiles or wall tiles, the tiles with a smoother surface and lower water absorption are less likely to be stained. Therefore, quartz tiles with high strength and low water absorption are easy to be stained. If you are worried about the ground skid resistance, you can select half-polished quartz tiles, followed by quartz sandstone tiles. In addition, the ceramic tile surface, edge and groove joint shall be selected with good leveling performance as far as possible, which is not easy to hide dirt, but also convenient to clean.

3. Damaged, and sharp are fake and inferior tiles

The most basic evaluation criterion for the quality of ceramic tiles is appearance. If the flatness of the appearance is poor, not only the quality can be considered, but also the feet can be easily scratched when they are posted on the wooden floor in the future. The key to inspection is to first check whether the grinding near the tiles is smooth and sharp, and then check whether the glaze layer is complete. Then check whether there are scratches and holes on the surface. Ask the manufacturer if he can scrape with a dollar coin to see the strength. If the surface is convex, concave, or easy to scrape, the tiles will be contaminated. Finally, stack the same two tiles to see if they are warped and whether their specifications are consistent. If the difference looks big, it may affect the decoration effect.

4. Listen to the sound

Another way for experts to determine the quality of ceramic tiles is to listen to the noise of ceramic tiles. Immediately pat the tiles with hard blocks, and you can find that some tiles have a thick sound, while others are light and brittle. Generally speaking, good quality quartz tiles make a crisp sound, which means that the relative density is high, and the calcination level and crystallization are good; On the contrary, those with thicker sound have lower relative density and weaker crystallization, such as porcelain tiles, which is why quartz tiles are more durable and easy to remove

5. Check the relative density on the back of water drop ceramic tile

Domestic ceramic tiles are often used in wet and cold natural environments such as bathrooms. Therefore, before selection, the manufacturer can be required to show the water absorption report of the selected ceramic tiles. According to CNS requirements, the water absorption of ceramic wall tiles should be less than 18%, that of stone wall tiles should be less than 6%, and that of quartz stone wall tiles should be less than 1%. Therefore, it is known that the relative density and crystallization of quartz tiles are the largest. Customers can also do a simple water absorption test of ceramic tiles on site. Water can be dropped on the opposite side of the ceramic tiles. If the moisture absorption slows down, it indicates that the water absorption is low and the quality is the best.

6. The design style is oriented to find the most suitable bathroom tiles

Ceramic tile has decorative art and is also an important element of bathroom design style. Especially in recent years, due to the great development of ceramic tile processing technology, basically all design styles can find corresponding ceramic tiles. The following selection principles are for your reference. If you like simple style, you can choose elegant frosted quartz tile, retro tile, and wood grain floor tile; If you like the restaurant style, you can choose the full throw quartz tile that imitates the natural marble, for example, it can build a bright and luxurious feeling. For those who like Zen style or soup house, they can choose pure natural quartz sand rock tile or semi-polished tile. The matted or chiseled surface has a sense of unsmooth layers with natural beauty.