If you have chosen the right tile, then how do lay tiles look good? Buy a good-looking tile, and how to pave, is another problem. If you only use the conventional paving method and will look monotonous. To paste the good-looking, in fact, the method is very simple, first of all, you have to choose a way you want to paste, and then with the right colour seam sealant on the good.
Tiles Tiling Guide - 12 best-looking ways to lay tile!
Here to provide you with 12 kinds of paste method references.
A single tile paving method
●Diamond-shaped paving
The effect of 45 ° rotation on the basis of the positive pavement, note that because of the later cutting relationship, the loss will be slightly larger, it is recommended to buy a few pieces of spare.
● I-shape paving (brick paving)
More popular in recent years, the square I store, compared to the positive pavement, gives a sense of lines more varied and interesting.
● I-shape pavement (brick pavement)
The square-shaped I-beam pavement that has become more popular in recent years gives a more varied and interesting sense of lines compared to the square pavement.
● Herringbone pavement
Two pieces of brick to 90 degrees to pave at an angle, will make the space looks retro and elegant, American style with quite a lot of.
Tips: the corner of the brick can be different colours with the same specifications, so the effect will be unexpected oh.
● Fishbone pavement
Fishbone pavement needs to be processed in advance and then pavement, pavement will be relatively energy-consuming, the legendary master will strike series. Pre-construction communication is very important.
PS: to the wood grain tiles into A group & B group, note that the two groups cutting direction is different.
● hexagonal paving
Hexagonal paving, this tile paving method, paving out of the tile is very rich, as opposed to the conventional large square tiles simply look too good.
Different tile size paving methods
● Windmill shape
Can be spelled with two or more different colours of tiles, a more retro way of tiling. Be sure to pay attention to the size of the square and rectangle. The long side of the rectangle must be two times the width, and the square side length must be the same as the width of the rectangle size.
● Complementary shape
With the combination of one large and one small tile with square specifications, the size of the two tiles is not limited. It is suitable for exotic style, American style, and vintage natural style. It is a tiling method that is often used in American dramas and villas.
● Tweed
The combination of two different sizes of square and rectangular tiles is suitable for large spaces like living rooms.
●Network
It is probably the most common way of paving with different sizes, and the construction is not as complicated as the others.
●Walkway
The combination of two sizes of square tiles into the form of a corridor, is more suitable for the American style and so on.
●Stage shape
The legendary master will strike series, very test the master's craft, when paving large tiles need to be three times the small tiles.
Hopscotch
Although it looks simple, there are three ways to match the size of the tiles when paving.
You want to tile beautiful and neat, what details need to pay attention to?
- The tiles should be paved in the order of wall tiles and floor tiles, and paved from the bottom to the top.
- The tiles must be soaked in water for more than half a day before paving, so that the tiles are not bubbling, and then taken out to dry for use.
- Tile seam, tile paving must be left seam, so as to prevent the tiles from being crowded with each other, resulting in a series of problems such as bulging, deformation, cracking, and falling off. Usually, the gap will be about 3mm.
- The tile paving will be opened on the top, but the master will generally use a more brutal method so that the open hole curved; so open the hole when you and the master said, with a hole opener, he understood, so that the open hole neat and beautiful.
Buy tiles from hanseceramictile.com, with constant delivery and high quality!