EN
FR
PT
AR
Laying floor tiles seems to be a simple thing, but in fact it is very technical. If you have no experience or do not lay floor tiles in strict accordance with the specifications, it will lead to uneven floor tiles, which will not only affect the beauty, but also easily pose a trip hazard. So how to repair the uneven floor tiles that have been dried? How to deal with the uneven floor tiles after laying? Next, Hanse brings an introduction to the uneven floor tile repair methods.
How To Repair Uneven Floor Tiles?
When laying the floor tiles, we must ensure that the ground is flat, but if the binder or cement mortar has been completely dried, we can take other repair methods. First, you need to pick out all the uneven floor tiles, and then you need to re lay them. Remove all cement mortar or adhesive from the tiles. If it can't be removed completely, you can choose new floor tiles, and then apply cement mortar or tile glue to pave again. Wait until the cement mortar is dry. Generally speaking, although there is error in the flatness of paving tiles, the error range shall not exceed 2mm. It can be tested directly through the guiding rule. If a guiding rule of 2 meters is selected, the inspection error shall not exceed 2 mm, which is related to the quality of the selected tiles and the paving technology.
Repair Skills For Uneven Floor Tiles
1. If only a few tiles are uneven, you need to use tools to take out the uneven tiles, buy the tiles and lay them again, and then wait for the cement to set. Of course, if the floor tiles are uneven in a large area, they need to be completely reworked to avoid greater impact on daily life.
2. If the floor tiles are not flat enough in the process of decoration, this situation is relatively simple. The decorator only needs to gently tap the floor tiles with a walling knife to know that the horizontal line of the floor tiles is flat. The set cement is not dry. This situation is relatively simple. The decorator only needs to gently tap the floor tile with a walling knife until this brick is at the same level as other tiles.
3. If the cement has completely solidified, this situation is relatively troublesome. If the bricks are uneven, you need to take out the uneven bricks, and then replace the new bricks. After that, you need to apply putty for leveling, and wait until the cement is completely dry.
The above is the introduction of the repair method for uneven and dry floor tiles. If we find that the floor tiles are uneven and dry after installing, it is difficult to deal with this situation. We need to remove the original uneven floor tiles and then lay new floor tiles. In order to ensure the flatness of the floor tiles, we need to install them in strict accordance with the specifications, so as to avoid uneven floor tiles.
16
