Many families choose to decorate tiles in the bathroom or living room section, mainly because it is easy to clean.

Floor tile selection guide - 7 ways to teach you to select high-quality floor tiles!

1. See: whether the tile is smooth

The first thing is to see whether the surface of the tile is smooth, whether there are impurities, or mixed with something different from the colour. The second is to see whether it is smooth around, whether the phenomenon of inverted edge, this tile we try not to buy. The following space with a large area of gray tones, the whole living room is more Chen pressure, sofa and coffee table is the highlight, neutral with a stylish personality. Scandinavian solid wood coffee table is more suitable for this simple and neutral home style. Completely compound the minimalist character of the owner and the atmosphere.

2. Knock: listen to the crisp sound

A corner of the tile vertically to the ground, gently knock the surface of the tile, if the surface of the tile sounds very crisp, it means that this tile's firing degree and the degree of glass are very good, quality, water absorption rate are better.

The bathroom is more common decorated with floor tiles, small squares of tiles are also very life-like.

3. Drip: test the water absorption rate

Gently drop some water on the back of the tile to see how well it spreads the water beads. If there is basically no diffusion of water beads, it means that the tile has a good degree of glass, and low water absorption, it is relatively good abrasion resistance, and stain resistance will be relatively good. And vice versa. Tile + log furniture is also a manifestation of industrial style, the following home is arranged in this way, very modern. In the Nordic style of logs, it is easy to show the advantages of wood in a unified space, natural, grounded life.

4. Grinding: test wear resistance

The fourth step in determining the goodness of the brick is to measure its wear resistance. With sharp objects, if the time to scratch with force, the brick surface is still smooth as new, it means that the wear resistance of this brick is very good, in the future use will not appear scratches and other problems.

5. Scratch: test anti-fouling performance

Measure the stain resistance of this brick, find an oil-based pen or ink and so on some things, hard in the brick surface left scratches, leaving traces, after leaving traces after five to ten minutes, we use a relatively clean toilet paper, rags to gently wipe, if at once wipe clean, it means that the level of stain resistance is relatively high, in the daily use of stain resistance is also relatively good.

This light colour with marble pattern floor tile is also commonly used at home, more mild atmosphere and elegant. The sofa is also the same colour so that the bedroom space looks with a sense of sophistication.

6. Measure: whether the size is regular

Use vernier calipers to measure the four corners of the brick and its diagonal. We can obviously see that the four corners of the measurement data are consistent, such as all 80 cm, if the four corners are different by 0.5 mm or less, we can determine that the brick in the paving process will not appear as gaps or the phenomenon of misalignment. In this case, the use of a large area of gray, the original wood colour in which the colour difference is very contrasting. Modern neutral, casual. Scandinavian solid wood, the original colour natural wind.

7. Contrast: the flatness of the brick

General brick flatness with vernier calipers to measure, but in daily life we can put two bricks together, stand them up, and see two bricks have no gaps, if the two bricks have no obvious gaps, it means that the flatness of this brick is very good.

Buy cheap tiles from tiles wholesale hanseceramictile.com, with constant delivery and high-quality product.