Renovating a house tile is an essential home improvement material, there are many types of tiles, and different kinds of functional characteristics are different. Today to tell you about the classification of tiles and various features, hope to help you somewhat when you buy and sell! 

How to choose tiles for your house, here are the detailed tips!

What is the classification of decoration tiles?

1. Glass tiles and polished tiles, in fact, glass tiles are also a kind of polished tiles, but he is in the technology and this material has a certain upgrade, it is a little more advanced, characterized by a better degree of light, the wear-resistant degree is also very good. But it also has the disadvantage that its colour is relatively single, that is, the colour is probably very little change, easy to dirty and not slip-resistant. Like this polished tile and glass tile bathroom and kitchen must not consider, because it is easy to slip after encountering water. 2.

2. Antique tiles, in fact, in our country at the beginning is not, is a technology introduced from abroad, simply speaking, it is also a kind of glazed tiles, but its technology is a little higher. Mainly do some matte aspects of the treatment, the advantage is that the colour is richer. The degree of wear is certainly not as polished, stain resistance is stronger than polished tiles.

3. Through the body tile, through the body tile is to say that it is a material through the body, also called full tile this tile advantage is the most important is non-slip.

4. Microcrystalline stone tiles, the microcrystalline stone is also called microcrystalline jade, is the word tile surface within the sintered layer of glass microcrystalline material of this microcrystalline glass. He was able to achieve that mirror effect, especially the high, especially this large area of special look bright and shiny. However, it has one drawback, namely that its wear resistance is not particularly high, and it is particularly easy to scratch. 

Polished tiles and glazed tiles a few differences

1. Polished tiles (glass tiles) polished and polished after firing, the flatness is good. But after polishing the surface appears slightly empty, and will bleed colour. Two firings are glazed tiles, the embryo is fired on the glazed surface and then fired again, so the flatness is not as good as polished tiles, but not bleeding colour. There are theoretically polished tiles and glazed tiles that can be made the same colour, just polished tiles out, manufacturers will not put new patterns to polished tiles, and new colours are done to glazed tiles above.

2. From the colour distinction, glazed tiles are more diverse colours. And polished tiles are a relatively single colour. The texture of the tiles on the glazed tile, the texture is more clear and natural, polished tile texture will be rough. The degree of wear resistance is from its process to speak. Wear resistance on this polished tile after two sintering, it is more wear-resistant degree, more suitable for living room paving. Glazed tile it's brighter, mirror effect is better so that its stain resistance is relatively good. 

3. Price difference, glazed tiles is in the polished tiles on the basis of an upgrade, it is a more complex process, so the price of glazed tiles to slightly higher. How to make the distinction? Polished tiles it has the embryonic layer of colour infiltration process, this kind of brick is polished tiles. Glazed tile glaze and embryo layer layering clear. There is no infiltration of this colour. The glaze is the glaze layer is the embryo layer, this kind of brick is the glazed brick. Polished tiles were the first to appear, the oldest process, the colours are too single and are now slowly being replaced by glazed tiles. Upgraded version of the glazed tiles, rich and diverse colours, the process is also changing, the so-called non-wear-resistant or the old concept, or cheap products. The best way to buy bricks is to choose a big brand, quality service is guaranteed! 

Selection of tiles brand and miscellaneous difference

1. First from this raw material to produce the distinction, look at the side of this tile especially floor tiles present this white or beige, no adulteration of this small black spots, black spots are generally impurities, adulteration is less pure, this kind of general are large manufacturers production because the raw materials are purer. Small manufacturers basically from the selection of materials so that they will be a little worse.

2. The better the hardness of the tiles, the higher the flatness. Good tiles are not easy to cut, small manufacturers in this hardness very flatness between only one, because he can not reach the technology flatness and hardness is between the two is a certain impact. If the hardness wants to reach high then the tile sintering time must be long, but the sintering time is long will cause the flatness to deform. This point some small manufacturers can not do, only large manufacturers have this process. 3.

3. Large manufacturers of tiles later will do a non-slip treatment, while many small manufacturers will omit this to do anti-slip treatment of this process.

How to choose the right tiles for different spaces in the renovation？

1. Livingroom tiles will generally choose the wear-resistant hardness of the large, living room to choose a solid tile or full glaze, mainly depending on their own needs and the overall style of decoration with the wall tiles do not have to choose a full porcelain general line.

2. Kitchen bathroom balcony with non-slip tiles, the general ground will choose antique tiles, antique tiles colourful, wear-resistant high temperature, water seepage rate is very low, that is to say, water is not easy to penetrate into not easy to dirty, also very good cleaning hygiene.

3. Living room dining room with tiles can be brighter, small space with 600 can be, instead of looking spacious, significantly brighter choice of glazed tiles, full glaze quality better point! 

Buy tiles from hanseceramictile.com, with constant delivery and a safe deal!