Easy DIY Bathroom Flooring Makeover | 5 Tips For Cheap Bathroom Tiles Floor

2020/4/8 17:43:06

Do you have some outdated and unattractive tile in your home, but don't want to rip it out and create a huge mess and expense, and you're looking for a really easy DIY bathroom floor project? Here hanseceramictile will present you a cheap and easy DIY makeover for your bathroom floor tile, covering how you can take some really ugly tile and turn it into something absolutely gorgeous. It’s easy and fast and will save you a ton of money. Now read this article and have hope that out-of-date tile can be given new life!

Best Tools For Cheap Bathroom Floor Makeover DIY

Basically, you're going to use some products and tools for bathroom floor remodeling on a budget:

Primer
Chalk paint
Some latex paint
A polyurethane sealer

Paintbrush
A sander

Easy DIY Bathroom Flooring Renovation - 5 Steps On How To Makeover Bathroom Tiles Cheaply

The first step for bathroom floor makeover on a budget is to clean your tile floor in bathroom. Make sure there's no hair and dust on the floor anywhere and you can take painters tape and go ahead and tape off the trim. Then you're going to apply that primer, apply it with a roller and then use a brush up against the trim. You want to apply two coats and make sure you allow the proper drying time in between coats.
You're going to apply the chalk paint. Use rust-oleum in the color charcoal, do two coats of that, let that thoroughly dry. Then apply an off-white latex paint color, apply two coats of that, as well, giving yourselves a lot of drawing time in between coats.

Paint your grout. Chose a lighter gray and use a simple paintbrush and paint every bit of the grout. The reason to paint the grout, first is because if you get a little bit of that lighter grey onto the tile it won’t be that big of a deal because you are going to be sanding that tile and so you don’t have to worry about being particularly perfect. This is actually the really fun part. Use a sander and begin sanding on each tile on the edges. Take the sander and swept across the tile in a few motions. This will bring out the gray color and the white color of the paint, it will make this tile look like Old World Tile.
If you start out and you've done a few tiles and you realized you used the sander too much, at this time, stop sanding and immediately paint that over and let it dry.
For the last step, you want to make sure you have vacuumed and swept every bit of the dust, which you've created quite a bit of dust sanding, get that all cleaned up and you're ready for the last step which is adding the polyurethane which is your top coat. Again, two coats of that, let it dry in between.